Kaveri Henna cones. STORE IN COOL DRY PLACE AND KEEP AWAY FROM DIRECT SUNLIGHT TO PRESERVE SHELF LIFE The tip of the cone may be little bent or loose. This is normal and can happen during transit. Simply straighten the tip and apply some cellotape if need be. As this is a natural henna cone, the initial stain will be orange-Maroon. This is absolutely normal and is the case with all natural henna. The stain will darken over the course of 24-48 hours. The longer you leave the paste on before peeling it off, the darker the stain will be. If there are clumps, this may be because the paste is too cold. Let the cones sit at room temperature to loosen all the paste. If there is some henna paste on the outside packet, this does not mean the henna is leaked. Sometimes, paste remains on the outer packaging during production. INSTRUCTION: 1.Remove the pin at the tip of the cone. 2.Slowly squeeze the cone onto a scrap piece of paper or tissue to test the flow of the paste. 3.Hold the cone like a pen and draw the desired pattern on your body. 4.Once you have finished applying, let the henna dry. Drying times for natural henna is about 15 minutes at room temperature. 5.Once henna is fully dried, peel off the dried top layer to reveal colour, it may initially start as orange-maroon. This is normal for natural henna. The colour will develop gradually. MADE IN INDIA - Specially packed by brand ATCUSA